A tub wall can feel like a small hurdle on a good day and a big one on a hard day. A tub-to-shower conversion takes out the tub and puts in a shower with a much lower step, or no step at all. Many homeowners in Winter Park choose it for safer, simpler daily bathing.
Jerysartarama Walk-In Tubs is a referral service. We explain how these projects work, list the questions worth asking, and connect you with an independent local provider in our network. Providers do the work, and they give you the quote, the contract, and the warranty. Read on to learn your options, typical costs, and warning signs before you hire. Take your time, and ask before you hire.
Why the tub wall gets in the way
A standard tub wall is often 14 to 20 inches high. Picture stepping over a kitchen chair every time you want to wash up. Once is easy. Doing it on wet, slick footing, with a tired knee, is not. Many homeowners start looking at a tub replacement after a slip, a close call, or a day when lifting a leg simply felt harder than it used to.
Is a conversion right for you?
A conversion suits you when you can stand, or shift over from a seat, but the tub wall is the hurdle. It also suits people who rarely take baths and want the space back. If a soaking bath eases your joints, a walk-in tub may fit better, and that has its own page on this site.
If you use a walker or a wheelchair, say so early. A roll-in design with no threshold is a different build from a low-curb shower. Providers in our network can talk through what your body and your bathroom need before anything is priced.
Your conversion options
Most safe bathing conversion projects fall into one of these groups:
- Low-curb shower. A short lip of a few inches holds the water in. It is easier than a tub wall, though you still step a little.
- Curbless or roll-in shower. The floor slopes gently to the drain. This is the usual choice for handicap accessible showers.
- Prefab insert. Molded acrylic or fiberglass pieces fit into the old tub space.
- Custom tile. Built on site to your measurements, with more design choices.
Ready-made or tailored?
Think of a ready-made jacket next to a tailored one. A prefab shower goes in quicker and has fewer seams to scrub. Tile can fit an odd corner and match the rest of the room, but it takes more steps and more skilled labor. Ask the provider which one they would pick for your bathroom, and why.
What the work involves
A provider will usually remove the tub, check the floor and walls underneath, adjust the plumbing, and add a waterproof layer before any finish goes on. It is like painting a wall: the prep decides how long the finish lasts. If a quote skips the waterproofing step, ask about it.
Slab homes and drain placement
Many homes in our region are concrete block on a slab, so the tub drain sits in the concrete. Moving it may mean cutting into the slab, which adds time and cost. Keeping the drain where it is can keep the job simpler. Ask which path your house needs.
Humidity and mildew
Warm, damp air most of the year gives mildew an easy start. Look for a proper waterproof membrane, mildew-resistant grout or solid wall panels, and a bath fan that vents outdoors. A fan is a small add-on compared with rot hiding behind a wall.
How long does it take?
Prefab jobs often take two to five working days once materials arrive. Custom tile may take one to two weeks, since each layer needs time to cure. Think of baking bread: you cannot rush the rise. Ordering, permits, and slab work can add days before the first tool comes out. Ask for a written schedule, and ask what happens if the job runs long.
Glass door, fixed panel, or curtain?
A glass door looks tidy and keeps the spray in, but it has a frame and a handle to manage. A fixed panel has no moving part, which suits many people, though you walk around it. A curtain is the simplest and the easiest to replace, and it works well with a seat or a helper. Choose based on how your hands and balance work, not only on looks.
Plan for the years ahead
A shower that works today should still work in ten years. Ask for wall blocking behind the tile so grab bars can be added anywhere later. Think of it as fitting the shelf brackets before you own the shelf. Other helpful items include a built-in bench, a handheld shower head on a slide bar, an anti-scald valve, and a slip-resistant floor.
Ask before you hire
Write your questions down and compare the answers from more than one provider:
- Do your own employees do the work, or subcontractors?
- Are you licensed and insured for this work in my state?
- Who pulls the permit?
- What is in the written quote, line by line?
- What warranty covers the labor and the materials?
- What happens if you find rot or damage once the tub is out?
What a good answer sounds like
A good answer is specific. 'Here is the permit, here is the waterproofing method, and here is the warranty in writing.' The provider explains the plan in plain words and welcomes follow-up. Clear answers first, even when the answer is 'it depends, and here is why.'
Red flags worth noticing
- Pressure to sign today
- A large cash deposit up front
- No written quote
- A shrug when you ask about permits
- Vague talk about waterproofing
How the referral works
Jerysartarama Walk-In Tubs is a referral service. Providers in our network are independent businesses. Jerysartarama Walk-In Tubs makes the introduction and does not build, install, or repair anything. Your quote, contract, and warranty are with the provider you choose.
Take the next step
Request a callback to check provider availability in the Winter Park area, or request an estimate and describe your bathroom. There is no obligation.
What's Included
Low Entry
A shorter step, or no step at all, so getting in and out takes less effort.
Solid Wall Backing
Providers can add blocking behind the walls so grab bars can be fitted securely, now or later, wherever you need them.
Moisture Protection for Humidity
A sealed membrane and a vented fan help keep mildew and hidden damage out of walls and floors.
Seating and Handheld Options
Benches and handheld heads let you wash while seated, with less reaching.
Typical Conversion Costs in the U.S.
Prices vary widely by bathroom size, materials, and what is hiding under the old tub. These are typical U.S. ranges only. Ask each provider for a written quote that lists every item so you can compare fairly.
| Item | Typical range | Notes |
|---|---|---|
| Prefab shower insert conversion | $3,000 – $8,000 | Quicker install, fewer seams |
| Custom tile shower conversion | $6,000 – $15,000 | More labor and design choices |
| Curbless or roll-in shower | $8,000 – $20,000 | Floor work often needed |
| Drain relocation in a slab | $800 – $3,500 | Depends on cutting and repair |
| Glass door or fixed panel | $400 – $2,500 | Curtains cost far less |
| Grab bars and built-in bench | $150 – $900 | Install cost varies by wall type |
How It Works
Share Your Situation
Describe your bathroom, your mobility needs, and any worries using the form or a phone call.
Meet a Local Provider
Jerysartarama Walk-In Tubs introduces you to an independent provider who can visit, measure, and talk through options.
Review the Written Quote
Check the scope, materials, permit, and warranty line by line before you agree to anything.
Work Gets Done
The provider you choose completes the conversion and walks you through care, cleaning, and warranty details when the job is finished.
Why Call Jerysartarama Walk-In Tubs
Providers Do The Work
Independent local providers handle the build. Jerysartarama Walk-In Tubs only makes the introduction.
No Pressure
Request an estimate, compare answers, and decide at your own pace with no obligation to move forward.
Ask Before Hiring
Our guides list what to ask and how a good answer sounds.
Plain Language
No jargon. Each step, term, and price range is explained simply before you decide.
Other Services
Need tub-to-shower conversions in Winter Park?
Have a bathroom worry? Request a callback or send the short request form. We will point you to an independent local provider in our network.
No obligationTub-to-Shower Conversions FAQ
How much does a tub-to-shower conversion cost?
Typical U.S. prices run from about $3,000 for a simple prefab insert to $15,000 or more for custom or curbless work. Slab drain changes, permits, and doors add to the total. Get a written quote that lists every item.
How long does a tub-to-shower conversion take?
Prefab jobs often take a few working days, while custom tile can take one to two weeks. Ordering, permits, and hidden damage can add time, so ask for a written schedule.
Does insurance help with a tub-to-shower conversion?
It depends on your plan. Some policies may cover sudden damage, but a safety upgrade is often paid by the homeowner. Check your policy, and ask the provider what paperwork they can help with.
Tell us what happened
Have a bathroom worry? Request a callback or send the short request form. We will point you to an independent local provider in our network.
No obligation